Feedback Sports Scorpion Bike Stand

It's okay, but at almost 3/4 of a hundred dollar bill, I'm underwhelmed. Just unable to come up with a way to keep it from coming loose. Added a lock washer, connector bolt still needs regular maintenance. Like every 3-5th time I put the bike on, it's beginning to sway and I need to reach for a metric allen wrench. Again.Just tired of it after months of use, but it's a necessary evil for mountain bikes, I guess, so I'm stuck with it.I'd recommend you keep looking before dropping this much coin on a wobbly- post thingamajig.

<update>. This stand is really pretty unbalanced. The bike can drop off the stand very easily. If you don’t touch it after putting the bike on the stand, you’re probably fine. But any little touch can move the bike off the stand and it falls over.Stand was easy to put together, and easy to get the bike on the stand (uses the crank arm hole). But, you need to be careful that you don't accidentally move the bike to much because it will come off the stand. There is no "clamp" to attach to the bike - it's just a long metal shaft that goes inside the crank arm. When the bike is all the way on the shaft, then you can't turn the cranks freely (they get in the way). I find it good for temporary storage when I'm charging my ebike, and for washing the bike.

I don't like that it's too unstable to use outside if there is a slight wind or in the grass. I was hoping to be able to use it when washing our bikes. The bikes are not centered on the base. They are all the way to one side of the base so, they can tip over very easy to one side. The manufacturer said I'm the only one having this problem. I find that hard to believe. If you're only going to use it in your garage, it will work. I've tried to post photo but, I can't get them to post.

I like keeping my bike clean, probably more than the average bird, and this makes it very easy to keep the bike upright for washing. (Also looks great after washing, perched up an kinda standing by itsself).One call out would be to make sure your cranks have a hole through the middle. Some older style cranks are solid and you will be disappointed to find out this wont work with your bike... It does come with different adapters, so just make sure you have a hole in the center of your cranks that extends maybe 3-4"A bit expensive for two pieces of metal, but that is the world we live in...

Absolute garbage. The two pieces didn’t fit together correctly. Poor craftsmanship anymore with these big companies. My bike fell over while on the stand. I do not recommend this product to anyone. To be honest based off the quality or lack there of I would not buy any Feedback Sports product!

The stand is perfect for my needs. I have a carbon road bike that sits just great on this mount. I got it so I can make small adjustments to the drivetrain as well as for cleaning the chain. Suits the purpose perfectly ! I was afraid it might be too short so there would be not enough clearance, also feared that the pedals might be difficult to operate, but none of those issues came up. This is very solid small piece that does not stand out or take much space, I use it to hold the bike all the time in my garage.

I don't mind putting my road bike in a conventional stand because it is so light and the crossbar is horizontal. However, the mountain bike is heavier and the odd angles make it difficult to hold without putting a lot of stress on the frame. The dropper seatpost with internal routing makes conventional mounting very difficult. So I decided to try this one. It works extremely well with my Niner RDO and it takes up almost no space in the truck when I travel. I also use it to store the bike in the garage. I highly recommend it for carbon mountain bikes.

I bought one of these about 4 years ago and it quickly became my go to bike stand and I just got around to buying a second one.Extremely stable, no more accidentally knocking the bike over, makes servicing the chain a snap. Unfortunately the price has about doubled since I bought my first one but I was able to find a “used” like new one on Amazon that saved me a little bit of money. Comes with three different sized spindles that are easily interchangeable depending on the size of the bike crank cavity. Only negative, other than price, is that many older bikes and some newer ones don’t have a crank cavity so obviously this rack won’t work with them.

Not as useful as I was expecting tbh. The insert slides off with the bike and it only actually works with 1 out of the 3 bikes I’ve got. I’d save your money.

Good sturdy stand for most mountain bikes, adapters for different axle types. Assembles quickly.

Easy to set up and use.. ideal stand for bike cleaning and manipulating gears

Soporte de calidad para tu mtb, tiene buenas terminaciones y nada que ver con otros que haya visto, muy contento con el

Mein Mann ist begeistert. Einfach und schnell aufzubauen und nimmt nicht viel Platz weg. Mountainbike „hängt“ dort gut dran.