Compatible Printer: HP Officejet Pro 8000, 8500, 8500A, 8500A Plus, 8500A Premium. Replacing printheads Follow these steps to replace the printheads in your printer: 1.Press the Power button to turn on the printer. 2.Open the top cover. 3.Press and hold the Resume button until the carriage moves to the left. CAUTION: Be careful not to proceed until the carriage is on the left side of the printer. If the carriage does not move to the left automatically, turn the printer off and back on and then try holding down the Resume button again. The printhead can be damaged if the carriage is not all the way to the left for installation. 4.Lift the printhead latch. 5.Lift the handle of a printhead and use it to pull the printhead out of its slot. 6.Shake the new printhead at least six times while the printhead is still in its packaging. 7.Remove the new printhead from its package, and then remove its orange protective caps. 8.Insert the printhead into its color-coded slot (the label on the printhead must match the label on the printhead latch). Press down firmly on the printhead until it snaps into place. 9.Pull the printhead latch all the way forward, and then press down until the latch engages. 10.Close the cover. 11.The printer should align the printheads automatically in a few minutes, printing an alignment page. If it does not, go to the next section to align manually. NOTE: Please click "OK" if the printer shows errror message. If your printer do not recognize the ink cartridge at the first time, please take it off and install again. If still can not, please remove the affected cartridge and turn off the printer for 30 min, clean the chip softly with alcohol or eraser, then turn on the printer and install the cartridge again.
E**N
Product worked well and definitely a cost saving
My HP Officejet 8500 printer accepted the JustColor 940 printhead replacements. I got a successful alignment and so far the printheads are working just fine. Definitely a cost saving over the HP brand. With these older HP printers, the HP brand is so costly that it is sometimes cheaper to replace the printer. I would recommend this product for 940 printhead replacement.
B**6
Did not work.
Aligning print heads, cleaning print heads, aligning print heads, cleaning print heads,Aligning print heads, cleaning print heads, aligning print heads, cleaning print heads.Pulled the plug!
J**.
They print heads don't work.
Neither cartridge worked. Don't waste your money. No way to get your money back. It's much cheaper than HZp for a reason!Ended up just buying a new printer.
A**D
The first 2-pack of HP 940 print heads contained one ...
The first 2-pack of HP 940 print heads contained one (M/C) that was faulty, but the seller sent another that worked well. I appreciate the sellers attention to my problem. I give 5 stars to the seller but deduct one star for the product because one of the two items was bad and had to be replaced. Not the seller's fault.
R**O
Great price point
Product was as described..Great price point. Very easy to install.
T**.
Five Stars
Very good product, and sent quickly. Recommend.
Trustpilot
1 month ago
1 week ago
